Introduce the precautions for the installation and fixation of polyurethane casters

Update:2020-04-17

Fixed polyurethane casters and universal casters should choose products of the same specifications, so that the matching degree is higher and the operation coordination is better. After installing the casters, try to ensure the stability and flexibility of each caster. After everything is ok, you can work with confidence. When choosing casters, after determining the specifications, the correct installation method is also very important. Not only can it ensure the flexibility of the universal caster operation, improve the operating efficiency, but also extend the service life.
Introduce the precautions for the installation and fixation of polyurethane casters
The following introduces the precautions for the correct installation of casters. When installing the brake caster, please avoid screwing the brake in the state of work, because it will cause damage and deformation of the brake and deterioration of performance. After confirming that the connection part is fixed, select screws, nuts, washers, etc. of appropriate size, insert into the mounting holes, and tighten the polyurethane casters until there is no gap to avoid loosening.
Especially when the screws are screwed into the installation, please tighten the hexagon part with proper torque. Avoid excessive screw-in to cause expansion of the rotating shaft and cause breakage. When installing the brake polyurethane casters, please avoid screwing the brake in the state of operation, because it will cause damage and deformation of the brake and deterioration of performance. The caster must be installed with the rotation axis in a vertical state.
When installing polyurethane casters, keep the installation level. When selecting casters, after determining the specifications, the correct installation method is also very important. Not only can it ensure the flexibility of the polyurethane caster operation, improve the operation efficiency, but also extend the service life. The following introduces the precautions for the correct installation of casters.
After confirming that the connection part is fixed, select screws, nuts, washers, etc. of appropriate size, insert into the mounting holes, and tighten the casters until there is no gap to avoid loosening. Especially when the screws are screwed into the installation, please tighten the hexagon part with proper torque. Avoid excessive screw-in to cause expansion of the rotating shaft and cause breakage. The caster must be installed with the rotation axis in a vertical state.


(Views:)